Felling FT16-2

Description

Trailer-I-Beam-Oak-Torsion-Elec Brakes-Plated Manufacturer: Felling Trailers Model: FT16 DDI-20 Type: Drop-Deck Equipment Trailer Series: DDI (Drop Deck I-Series) Deck Length: 20' Deck Width: 83" between fenders / 102" overall GVWR: 18,400 lbs. GAWR: 16,000 lbs. (2 × 8,000-lb. axles) Approx. Trailer Weight: 4,000 lbs. Approx. Payload Capacity: 14,400 lbs. Main Frame: 10" × 15 lb./ft. I-beam Crossmembers: 4" (80K) Jr. I-beam Crossmember Spacing: 18" on center Deck: 2" nominal White Oak Deck Height: Approx. 24" loaded / 27" unloaded Rear Ramps: 6' × 16" angle-iron spring-assist ramps Ramp Accessory: Full-width ramp rod Axles: Tandem 8,000-lb. Dexter oil-bath drop axles Suspension: Dexter TorFlex rubber torsion Axle Spread: 42" Brakes: Dexter forward self-adjusting electric brakes on all axles Tires: 215/75R17.5 Load Range H Wheels: 17.5" × 6.75", 8-bolt plated steel Hubs: Oil-bath Tie-Downs: Eight 5/8" straight D-rings Coupler: Adjustable 2.5" lunette eye/pintle Coupler Rating: 42,000 lbs. Jack: 12,000-lb. side-wind drop-leg Electrical Plug: 7-way RV Lighting: LED, 4-tail-light system Wiring: Sealed wiring harness Safety Chains: 3/8" Grade 70 Document Holder: Standard Finish: Felling Black powder coat with white Felling decal Construction: Heavy-duty steel