2018 Case IH Patriot 4440

Description

2018 CASE IH PATRIOT 4440 2018 Case IH Patriot 4440 equipped with a 90-ft boom, boom leveling, and a stainless-steel tank. This unit features narrow tires with hydraulic tread adjust, traction control, and 20" nozzle spacing. It’s fully guidance-ready and comes with a Case IH 372 receiver and AFS Pro 700 display. Also equipped with Raven Hawkeye PWM for precise application control. -Front right hub leaking -All four knee joints did not look properly greased, at least two need bushings -tires unevenly worn -booms would not completely unfold -crystallization in the inductor - don't know if the liquid in the tank was from winterization or just not clean - multiple hydraulic cylinders leaking -large amount of hydraulic fluid covering right side of the main rear mast from an unknown place -rear main seal on engine leaking, actively dripping while running -bend in the left boom -all product hoses were sun checked -product hose on the right boom where the last section folds was spliced together and repaired but left too long causing a kink in the product hose -appears to be missing a sensor for the raven pwm on the first nozzle body on the left boom -evidence of a water leak coming from the front of the engine -hydraulic pumps in the rear of the machine had unnecessary noise, sounded like it at been run low on hydraulic fluid too many times RAVEN HAWK EYE PWM AFS PRO 700 RECEIVER 372 CASE Tire Width: Narrow