2019 John Deere 8370R

Description

IVT, ILS, 480X50 FS 30%, DUALS 30%, 420X34 BKT 40%, DUALS FS 40%, 22 FW, 1400LB INSIDE, 900LB OUTER, 450 +165 DUAL RW, PREM CVIII, ACTIVE SEAT, PREM LED LIGHT PACK, JDLINK CONNECT 5YR, 4600 CMD CENTER, 4600 PREM 3.0 ACTIVATIONS, LESS RECEIVER, HYD POWER STEERING, 60 GPM HYD PUMP, 5 SCV, 1000 PTO, 20000 LB LIFT, HYD. CENTER LINK, CAT 4 HITCH & DRAWBAR, 120MM AXLES, FENDERS, AUX HYD CONNECT 1/2 Cab: Cab, Front Axle: MFWD w/ Suspension, Transmission: IVT, Guidance-ready: Yes, Guidance Display: Yes, Rear PTO: 1000, Rear Tires: Duals, Tire Width: Mid, AutoPowr Infinitely Variable Transmission (IVT) 42 km/h (26 mph), 4600 CommandCenter with Extended Monitor, StarFire 6000 Receiver - SF3 and RTK (Modem/Radio Not Included), 4600 CommandCenter Premium Activation 3.0, 4600 Processor, Premium CommandView III Cab with ActiveSeat, Premium Radio Package, Right-hand Reverser Linear-Type Transmission Controls, John Deere PowerTech 9.0 L (549 cu. in.) 6 Cylinder Tier 4/Stage V Compliant Diesel Engine, 227.1 L/min (60 gpm) Hydraulic Pump, Five Premium Rear Remote SCVs with Electrohydraulic (EH) Controls, Premium Couplers, and High Pressure Relief Levers, 45 mm (1-3/4 in.) 1,000 rpm (20-spline) PTO, 9,072 kg (20,000 lb) capacity 3-Point Hitch (Cat 4N/3) Hitch with Sway Blocks and Quik-Coupler, Category 4 adjustable Swinging Drawbar with 50 mm (2 in.) Pin with heavy duty support, 120 mm (4.72 in.) diameter by 3010 mm (118.5 in.) length with Double Taper Wheel Hubs, 480/80R50 159A8 R1W Radial in